This 3D Aroma Lamp with touch control creates beautiful shapes and colours that are cleverly integrated into the mirror of each warmer creating wonderful light shows! Each burner looks beautiful when not is use, but once you turn on and combine the gentle light with your favourite fragrance, then your room takes on a new ambience.
Touch sensitive turn on and off by simply touching the lamp, and has levels of brightness, on, level 1, level 2, level 3 and off. This 3D Aroma Lamp is UK mains powered via a black cable, and is fitted with a 23W Halogen capsule bulb with a spare bulb included, and full instructions are included in the box. Simply place your favourite fragrance in the glass dish on the top of the lamp, switch on and relax as your room is filled your favourite fragrance.
Please see the care and safety instructions below prior to purchase, and please remember, NEVER leave a lit candle unattended and keep well away from children and pets and all flammable decor.
Aroma stars wax warmer
CARING FOR YOUR CANDLES
All of our Kandls are lovingly hand poured and scented using natural soy wax to provide you with hours of scented pleasure. To keep them looking and working safely, follow the tips below to enjoy a better scent experience for longer.
Please remember, NEVER leave a lit candle unattended and keep well away from children and pets.
How to burn your candle
1. Light your candle in a well-ventilated room, away from draughts or fans, which can cause sooting or rapid, uneven burning.
2. Burn regular-sized candles for about two hours at a time. Burning for less time can cause the candle to 'tunnel', which leaves wax around edges. Burning for longer periods (over four hours) can cause wick migration.
3. Make sure you stop burning your candle when approximately 1cm of wax remains at the bottom.
About your wicks
1. Keep the wax pool clear of wick trimmings and matches, as debris in the wax can relight.
2. Centre and straighten the wick after blowing out the flame using a snuffer or by gently dipping the wick ind into the wax and then straightening once extinguished. A candle which has been burning too long can cause wick migration. If you see a flaming wick getting close to the edge of the container, blow it out and straighten the wick to prevent cracking or worse.
3. Long or crooked wicks can create high flames, smoking or sooting. Trimming the wick to 5mm before each lighting (when the wax is cool) is the easiest way to prevent this.
Storing your candles or melts
1. When your candle isn't in use, store in a cool dry place and cover with a lid, aluminium foil or in a melts polypropylene bag to protect the quality wax from dust, which can dull its scent and cause problems during burn. Never use cling film as this will absorbs the fragrance and ruin the candle.
2. Condensation on the surface of a candle is a sign it has not been stored correctly or for too long, simply wipe this away with a paper towel before lighting.
3. Storing candles for too long can affect the scent, ensure you use your candle in a reasonable time to make the most of the beautiful fragrance.
4. You may notice what look like air bubbles on candles in clear glass jars. After the molten wax has been poured into a container and it cools down, it will slightly shrink, which can cause the wax to pull away very slightly from the edge. This gap is extremely small, however the glass creates the illusion of an air bubble, but once you light your candle and it warms back up, the bubbles should disappear.
Now The Boring Stuff!
All Kandls have warnings attached to the jar, tin or packet regarding any warnings and/or allergies, and a full list of ingredients for CLP (Classification, Labelling & Packaging) regulations.
And last of all, once again please remember, NEVER leave a lit candle unattended and keep well away from children and pets.