top of page
Grey + White ceramic wax burner

Grey + White ceramic wax burner

Grey and white ceramic wax burner. Simply add your wax melts to the pot, light the tealight in the centre underneath and relax!

As with all our tealight burners, 4 tealights are included to get you started, and it should only be used with the smaller tealights only, not the oversized ones.

Please see the care and safety instructions below prior to purchase, and please remember, NEVER leave a lit candle unattended and keep well away from children and pets and all flammable decor.

 

IMPORTANT SAFETY NOTICE: Once tealight is lit inside melter, please handle with care and only handle the base of the melter as the top of the vessel may become extremely hot.

Melt capacity:
Approx. 150g

Burner Dimensions:
approx 120mm x 80mm x 80mm 

Glass Weight:
-

 

IMPORTANT! Please note, product photo may differ from actual item in terms of colour due to lighting and/or manufacturing. Please note before purchasing items they will not be refunded on this basis. 

  • Care and safety instructions.

    CARING FOR YOUR CANDLES

    All of our Kandls are lovingly hand poured and scented using natural soy wax to provide you with hours of scented pleasure. To keep them looking and working safely, follow the tips below to enjoy a better scent experience for longer.

    Please remember, NEVER leave a lit candle unattended and keep well away from children and pets.

    How to burn your candle

    1. Light your candle in a well-ventilated room, away from draughts or fans, which can cause sooting or rapid, uneven burning.

    2. Burn regular-sized candles for about two hours at a time. Burning for less time can cause the candle to 'tunnel', which leaves wax around edges. Burning for longer periods (over four hours) can cause wick migration.

    3. Make sure you stop burning your candle when approximately 1cm of wax remains at the bottom.

    About your wicks

    1. Keep the wax pool clear of wick trimmings and matches, as debris in the wax can relight.

    2. Centre and straighten the wick after blowing out the flame using a snuffer or by gently dipping the wick ind into the wax and then  straightening once extinguished. A candle which has been burning too long can cause wick migration. If you see a flaming wick getting close to the edge of the container, blow it out and straighten the wick to prevent cracking or worse.

    3. Long or crooked wicks can create high flames, smoking or sooting. Trimming the wick to 5mm before each lighting (when the wax is cool) is the easiest way to prevent this.

    Storing your candles or melts

    1. When your candle isn't in use, store  in a cool dry place and cover  with a lid, aluminium foil  or in a melts polypropylene bag to protect the quality wax from dust, which can dull its scent and cause problems during burn. Never use cling film as this will absorbs the fragrance and ruin the candle.

    2. Condensation on the surface of a candle is a sign it has not been stored correctly or for too long, simply wipe this away with a paper towel before lighting.

    3. Storing candles for too long can affect the scent, ensure you use your candle in a reasonable time to make the most of the beautiful fragrance.

    4. You may notice what  look like air bubbles on candles in clear glass jars. After the molten wax has been poured into a container and it cools down, it will slightly shrink, which can cause the wax to pull away very slightly from the edge. This gap is extremely small, however the glass creates the illusion of an air bubble, but once you light your candle and it warms back up, the bubbles  should disappear.

    Now The Boring Stuff!

    All Kandls have warnings attached to the jar, tin or packet regarding any warnings and/or allergies, and a full list of ingredients for CLP (Classification, Labelling & Packaging) regulations.

     

    And last of all, once again please remember, NEVER leave a lit candle unattended and keep well away from children and pets.

£6.99Price
bottom of page